NEW HEYCO EMC METAL LIQUID TIGHT CORDGRIPS

EMC Nickel-Plated Brass with Contact Sleeve

• Excellent 360° shield contact with contact sleeve due to braided shield which runs into the gland.
• Combination of the sealing insert and the contact socket guarantees a constant contact quality with minimal transfer impedance.
• Ideal for applications where Electromagnetic Compatibility (EMC) is needed.
• Long thread for use in standard or thick panels.
• Inner cable protection.
• Nickel-plated finish over brass provides excellent corrosion resistance and durability.
• EMC locknuts available. See page X-X.
• Multiple sizes for cable diameters ranging from .10˝ (2.5 mm) - 1.00˝ (25.5 mm).
• IP 68 Rated.
• Temperature range of -40°F (-40°C) to 212°F (100°C).
• Cord Grips are made of nickel plated brass and the gland is made of TPE.

Click here to view a PDF (100 Kb) with more information.

Ask a question about EMC Metal Liquid Tight Cordgrips, or call our helpful, expert staff on (08) 8268 2733

Keystone Electronics has, in keeping with accelerated demands for “AA” and ”A” surface mount Battery Clips for dense packaging use, developed a new group of low profile clips which firmly secure inserted batteries and withstand shock and vibration.
Featured is an exclusive “flow hole” SMT solder tail design which significantly enhances joint strength and assures battery retention. At the same time, low profiles make the clips ideal for dense PCB placements.

The new SMT clips are made of .012” (.30mm) thick, nickel plated steel and is available in bulk (part #53) or on tape and reel (part#53TR) with 125 pieces per 15.0 inch reel. A 44mm wide Polystyrene Carrier Tape, meeting ANSI/EIA-481 standards, is used on the reel with parts mounted on a 24mm pitch.

Click here to view a PDF (575 Kb) with more product details.

Ask a question about the new Keystone SMT "AA & A" Battery Clips, or call our helpful, expert staff on (08) 8268 2733

Micro Plastics’ has expanded its inventory to offer Threaded Rod in Polyvinyl Chloride. This PVC material is an amorphous thermoplastic with chemical resistance and dielectric properties. Good tensile, flexural and mechanical strength, low moisture absorption, exceptional dimensional stability and good flammability characteristics.

Polyvinyl Chloride has a maximum service temperature of 140° F., has a good high strength to weight ratio and is rated UL94V0. This new versatile PVC Threaded Rod stock is offered in standard lengths of 2, 4, 6 and 8 feet. Special lengths can be cut to meet customer application requirements for a nominal cutting charge. Thirteen standard thread sizes are available from 4-40 through 1-8 UNC.

Ask a question about our new range PVC Threaded Rods, or call our helpful, expert staff on (08) 8268 2733

NPA - 10 Gray Street, Kilkenny, SA 5009 | Tel: (08) 8268 2733 | Fax: (08) 8268 1455

© 2009 NPA PTY LTD