Bumpers & Feet

14.2mm santoprene bumper that easily presses into 3.1mm holes.

15mm santoprene bumper that easily presses into 2mm holes.

21mm bumper feet attachable to 4.2mm holes by inserting the central push rivet. Fit panels up to 3.1mm thick.

Two piece 10.8mm bumper set with a push rivet to fasten the bumper into 3.6mm holes. Suitable to use as feet. Fits panels up to 1.2mm thick.

Two piece 10.8mm bumper set with a push rivet to fasten the bumper into 3.6mm holes. Suitable to use as feet. Fits panels up to 2.5mm thick.

Two piece 21mm bumper set with a push rivet to fasten the bumper into 4.2mm holes. Suitable to use as feet. Fits panels up to 1.8mm thick.

Two piece 21mm bumper set with a push rivet to fasten the bumper into 4.2mm holes. Suitable to use as feet. Fits panels up to 2.8mm thick.

Two piece 21mm bumper set with a push rivet to fasten the bumper into 4.2mm holes. Suitable to use as feet. Fits panels up to 1.8mm thick.

Two piece 21mm bumper set with a push rivet to fasten the bumper into 4.2mm holes. Suitable to use as feet. Fits panels up to 4mm thick.

Moulded from Santoprene for skid and vibration resistance. Two piece construction comes pre-assembled. Reusable. To install, simply insert pin into the mounting hole, then press to secure. Moulded from Thermoplastic Rubber (TPR). Flammability Rating: 94-HB. Temperature Range: -30°F (-34°C) to 250°F (121°C).

Two piece 20mm bumper set with a slotted screw to fasten the bumper into 5mm holes. Suitable to use as feet. Fits panels up to 2.3mm thick.

Two piece 30mm bumper set with a slotted screw to fasten the bumper into 5mm holes. Suitable to use as feet. Fits panels up to 1.5mm thick.

24mm santoprene bumper feet with a slotted screw to fasten to 5mm holes.

Hemispherical rubber bumper for 7.9mm holes. Fits panels up to 1.6mm thick.

Rubber bumpers for filling 6.4mm holes. Can also be used as feet. Fit panels up to 3.2mm thick.

22.2mm rubber bumpers for 5.5mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet.

7.9mm Rubber bumpers for through hole protection. Fit 4.8mm holes with panels up to 1.2mm thick. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet.

14.2mm flat headed rubber bumpers designed to push into 7.1mm holes. Fit panels up to 2mm thick. Can also be used as feet.

9.7mm flat headed rubber bumpers designed to push into 4.7mm holes. Fit panels up to 1.6mm thick. Can also be used as feet.

14.2mm flat headed rubber bumpers designed to push into 6.4mm holes. Fit panels up to 3.2mm thick. Can also be used as feet.

Thick 12.7mm cylindrical rubber bumpers designed to push into 7.1mm holes. Fit panels up to 1.2mm thick. Can also be used as feet.

Flat headed 12.7mm rubber bumpers designed to push into 6.4mm holes. Fit panels up to 1.6mm. Suitable for use as feet as well.

6.1mm bumper designed to push into 3mm holes. Fits panels up to 2.5mm thick. Can also be used as feet.

7.9mm bumper designed to push into 3.8mm holes. Fits panels up to 3.3mm thick. Can also be used as feet.

9.7mm bumper designed to push into 4mm holes. Fits panels up to 0.8mm thick. Can also be used as feet.

7.9mm bumper designed to push into 4.6mm holes. Fits panels up to 1.6mm thick. Can also be used as feet.

8.4mm rubber bumpers are designed for through hole installation. Designed to press snugly into 6.1mm holes. Fits panels up to 1.5mm thick.

12.7mm rubber bumpers are designed for through hole installation. Designed to press snugly into 4mm holes. Fits panels up to 2.8mm thick.

6.4mm rubber bumpers are designed for through hole installation. Designed to press snugly into 5.8mm holes. Fit panels up to 1.2mm thick.

9.7mm rubber bumpers are designed for through hole installation. Designed to press snugly into 4.7mm holes. Fit panels up to 1.3mm thick.

12.7mm rubber bumpers are designed for through hole installation. Designed to press snugly into 4.8mm holes. Fit panels up to 1.6mm thick.

13.4mm rubber bumpers are designed for through hole installation. Designed to press snugly into 6mm holes. Fit panels up to 1.9mm thick.

10.4mm rubber bumpers designed for installation in 5.5mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 2.4mm thick.

12.7mm rubber bumpers designed for installation in 6.4mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 1.2mm thick.

9.7mm rubber bumpers designed for installation in 6.4mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 1.6mm thick.

12.7mm rubber bumpers designed for installation in 6.4mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 1.6mm thick.

12.7mm rubber bumpers designed for installation in 7.1mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 1.2mm thick.

16mm rubber bumpers designed for installation in 7.1mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 3.2mm thick.

31.8mm rubber bumpers designed for installation in 7.9mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 1.2mm thick.

16mm rubber bumpers designed for installation in 7.9mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 2.4mm thick.

21.5mm rubber bumpers designed for installation in 8.3mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 2.4mm thick.

25.4mm rubber bumpers designed for installation in 12.7mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 4.8mm thick.

25.4mm rubber bumpers designed for installation in 12.7mm holes. Designed to fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 3.2mm thick.

Flat headed 20.6mm rubber bumpers designed to push into 6.4mm holes. Fit panels up to 1.6mm. Suitable for use as feet as well.

Flat headed 20.6mm rubber bumpers designed to push into 6.4mm holes. Fit panels up to 2mm. Suitable for use as feet as well.

8.6mm rubber bumpers designed for through hole protection. Fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 2mm thick.

12.7mm rubber bumpers designed for through hole protection. Fit snugly into your opening and not let air, water, etc. pass through. Can also be used as feet. Fit panels up to 1.6mm thick.

Round rubber bumpers with a recessed centre to fit a #4 screw. Include a washer.

Provides excellent traction and shock absorbing qualities. Recessed hole fits #4 screw without protrusion. Moulded from BUNA S rubber.

Provides excellent traction and shock absorbing qualities. Recessed hole fits #4 screw without protrusion. Moulded from BUNA S rubber.