PCB Hardware

Surface mounted 2.5mm audio jacks with mono audio output. 1000 pieces on tape and reel.

Surface mounted 2.5mm audio jacks. 1000 pieces on tape and reel.

Surface mounted 3.5mm audio jacks with mono audio output.

Surface mounted audio jacks to mate with 3.5mm plugs. For stereo applications. 800 units on each tape and reel.

Uninsulated miniature banana jack with an unassembled solder lug and nut.

Uninsulated banana jacks for miniature plugs. Swage mounted.

Uninsulated banana jacks for miniature plugs. Swage mounted.

Uninsulated banana jacks for miniature plugs. Swage mounted.

Miniature banana plugs with an external thread. Current rating: 10 Amps.

Miniature banana plugs with swage mounting. Current rating: 10 Amps.

Miniature banana plugs with solder connections. Current rating: 15 Amps.

Miniature banana plugs with solder connections. Current rating: 15 Amps.

Fully insulated banana jacks with a 45º angled solder lug and nut. The head is narrow.

Uninsulated banana jacks for standard 4.5mm plugs. Swage mounted.

Fully insulated banana jacks with a solder lug and nut. The head is recessed.

Fully insulated standard banana jacks with a solder lug and nut.

Fully insulated standard banana jacks with a solder lug and nut.

Fully insulated standard banana jacks with a solder lug and nut.

Fully insulated standard banana jacks with a solder lug and nut.

Uninsulated banana plugs with a male 8-32 threaded fitting.

Miniature banana plugs with solder connections. Current rating: 15 Amps.

Miniature banana plugs with solder connections. Current rating: 15 Amps.

Standard sized banana plug with a 6-32 male thread and solder lug for mounting. Current rating: 15 Amps.

Standard banana plugs with a screw and lug supplied unassembled.

Standard banana plugs with a screw and lug supplied unassembled.

Standard sized banana plugs with solderless connections. Current rating: 15 Amps.

Standard sized banana plugs with solderless connections. Current rating: 15 Amps.

Miniature banana plugs with solderless connections. Current rating: 15 Amps.

Standard sized banana plugs with solderless connections and a set screw. Current rating: 15 Amps.

Standard sized banana plugs with solderless connections and a set screw. Current rating: 15 Amps.

Rivet mounted standard banana plugs.

Rivet mounted standard banana plugs.

Large banana plugs with a screw and lug supplied unassembled.

Standard sized banana plug with a 10-32 male thread and solder lug for mounting. Current rating: 15 Amps.

Rivet mounted clips to fit a single C cell battery.

Rivet mounted clips to fit a single C battery.

Rivet mounted clips to fit two C batteries.

Insulated battery clips with a terminal lug. Fit a single "D" battery.

Rivet mounted clips to fit two D batteries.

Surace mounted battery contact for a single "A","AA", "CR2" or "CR123A" battery.

Pairs of leaf spring contacts for mounting onto cases. Compatible with AAA, AAAA, N, A23 and A27 batteries.

Rivet mounted holders for four AA batteries in a series circuit without the need for additional wiring.

Rivet mounted holders for a single 2/3A battery. Feature lugs for soldering onto.

Battery insulator tabs will protect batteries and circuitry during shipping and handling. Pull out the insulator from the product to activate. Lettering and arrow provide intuitive markings for proper use. Supplied on a 3" roll, with micro-perf separation between insulators.

Battery insulator tabs will protect batteries and circuitry during shipping and handling. Pull out the insulator from the product to activate. Lettering and arrow provide intuitive markings for proper use. Supplied in a pack of 1000 individual tabs.

PCB card guides may be used horizontally or vertically and snap into .125 (3.18mm) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation.

PCB card guides may be used horizontally or vertically and snap into .125 (3.18mm) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation.

PCB card guides may be used horizontally or vertically and snap into .125 (3.18mm) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation.

PCB card guides may be used horizontally or vertically and snap into .125 (3.18mm) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation.

PCB card guides may be used horizontally or vertically and snap into .125 (3.18mm) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation.