Tools

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaw Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm).

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaw Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm).

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaw Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm).

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaws. Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm)

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaws. Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm).

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaws. Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm).

Hand air tools eliminate operator fatigue and improve assembly rates. Activated with a flap handle, the air tool has replaceable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a breeze. Important: One set of jaws is furnished with each Air Tool. A different set of jaws is needed for each mounting hole diameter, and special jaws are required for SR 3A-4 and SR 4A-6. Please advise both the mounting hole size and the strain relief part number when ordering an Air Tool or Air Tool jaws. Air pressure required: 80 to 125 psi at the tool. Jaw Clearance Required - 1-3/4"(44.5mm).

Automatic cable tie installation tool for tightening and cutting cable ties in one operation. Provided with a device that allows the predetermination of the tension. Body moulded from plastic with steel mechanical parts. Fit cable ties from 2.2mm to 5mm wide.

Self-Adjusting cable cutter and stripper. Suits wires 0.5mm² to 8mm². Maximum stripping length is 25mm.

Automatic cable tie installation tool for tightening and cutting cable ties in one operation. Provided with a device that allows the predetermination of the tension. Fit cable ties from 2.2mm to 4.8mm wide.

Cable tie installer that manually tensions the cable tie without a pre-set control. It has a separate arm to manually cut the cable tie when desired tension is reached. Fits 2.5mm to 10mm wide cable ties.

Cable tie installer that manually tensions the cable tie without a pre-set control. It has a separate arm to manually cut the cable tie when desired tension is reached. Fits 7.8mm to 13mm wide cable ties.

Suspended ceiling hook installation tool is designed to install both type hooks without using a ladder. The tool threads on to most standard extended poles for paint rollers. Tool may also be used for attaching accessories with a male or female M6 thread. Nut and screw not included. This assembly may also be used to remove hooks.

Crimping tool for bootlace ferrules. Suits 0.5mm² to 6mm­² wires.

Crimping tool for bootlace ferrules. Suits 0.5mm² to 2.5 mm­² wires.

Crimping tool for bootlace ferrules. Suits 6mm² to 16mm­² wires.

Crimping tool for copper compression lugs. Suits 10mm² to 120mm² cables.

Crimping tool for copper compression lugs. Suits 10mm² to 95mm² cables.

Crimping tool for copper compression lugs. Suits 0.5mm² to 16mm² cables.

Crimping tool for copper compression lugs. Suits 35mm² to 120mm² cables.

Crimping tool for copper compression lugs. Suits 10mm² to 50mm² cables.

Crimping tool for copper compression lugs. Suits 10mm² to 95mm² cables.

Hand Crimping Tool for female non-insulated terminals. Fits 0.5mm² to 6mm² terminals.

Hand Crimping Tool for female non-insulated terminals. Fits 1.1mm² to 10mm² terminals.

Hand Crimping Tool for female non-insulated terminals. Fits 1.25mm² to 5.5mm² terminals. Strips wires 0.75mm² to 6mm².

Hand Crimping Tool for female non-insulated terminals. Fits 0.5mm² to 2.5mm² terminals.

Tough, lightweight drive tools to assist with the installation of drive rivets. To use, load the rivet into the tool and inserted into a prepared hole. Pressure on the plunger frees the pin and expands the rivet in the assembly. Red tool fits .075" (1.91mm) diameter rivets.

Tough, lightweight drive tools to assist with the installation of drive rivets. To use, load the rivet into the tool and inserted into a prepared hole. Pressure on the plunger frees the pin and expands the rivet in the assembly. Yellow tool fits .125" (3.18mm) diameter rivets.

Tough, lightweight drive tools to assist with the installation of drive rivets. To use, load the rivet into the tool and inserted into a prepared hole. Pressure on the plunger frees the pin and expands the rivet in the assembly. Green tool fits .150" (3.81mm) diameter rivets.

Handy assortment of screw driver bits compatible with power tools. Hand tool included.

Extendable plastic and metal pole designed for installing Microplastics ceiling hooks. Male threaded end is the same size as standard paint roller poles. For an M6 adapter hole refer to 45CHINSTL.

Set consisting of top & bottom tool for staking 2.36mm eyelets. Made from Tool Steel and highly polished.

Set consisting of top & bottom tool for staking 5.1mm eyelets. Made from Tool Steel and highly polished.

Allows for punching 22.2mm holes in mild steel, aluminum, fiberglass, and plastic. Double D configuration protects your strain relief and cable assembly from the forces of twist. Unique design prevents metal distortion during punching operation.

Easy to use tools for installing swage mounts. Kit includes: Impact Handle & Anvil holder, Swaging tools for .040" (1.35mm) to .093" (2.36mm) swage diameter and double ended turret terminals and Anvils for Turret terminals & Spring loaded receding pins for eyelets.

Empty labkit box ideal for storing spare parts.

Empty labkit box ideal for storing spare parts.

Manual cable tie tool with the body made of a plastic material. Cutting of excess material is acheived twisting the tool. Body moulded from plastic with steel mechanical parts. For cable ties from 2.5 to 5mm wide.

Replacement blades for small size utility knife.

Small multi-purpose utility knife. Features all metal construction and snap off blades.

Large size heavy duty multi-purpose utility knife. Features rugged construction and snap off blades.

Small multi-purpose utility knife. Features plastic/metal construction and snap off blades.

Medium size multi-purpose utility knife. Features plastic/metal construction and snap off blades.

Medium size multi-purpose utility knife. Features plastic/metal construction and snap off blades.

Small multi-purpose utility knife. Features plastic/metal construction and snap off blades.

Small multi-purpose utility knife. Features all metal construction and snap off blades.

VF-28 Cutting Tool. For cutting Heyco-Flex I Conduit and Heyco-Flex II, III & IV tubing cleanly and evenly.

Adjustable hand pliers for all Heyco Strain Relief Bushings that assemble into holes 3/4"(19.1mm) and larger diameter holes.

A-10 adapter pliers for quick and easy locking of Heyco's strain relief adapters. (Part Numbers 7562, 7567, 7570 and 7572)

Hand pliers adjustable for all Heyco Strain Relief Bushings (except SR 3A-4 and SR 4A-6) that assemble into holes up to 7/8" (22.2 mm) diameter.