Round cable strain relief bushings with a Bell Mouth - For an even smoother fit. Fits SJ, SJO & SJT cables measuring AWG 16/2 (8.2mm), 18/3 (8.4mm), 14/2 (8.9mm), 16/3 (9mm) and 18/4 (9.1mm).
Round cable strain relief bushings with a Bell Mouth - For an even smoother fit. Fits SJ, SJO & SJT cables measuring AWG 16/2 (8.2mm), 18/3 (8.4mm), 14/2 (8.9mm), 16/3 (9mm) and 18/4 (9.1mm).
Lock-it strain relief bushings that easily snap onto round cables to fit through rectangular holes. Refer to the datasheet for compatible cable dimensions.
Lock-it strain relief bushings easily fasten onto round cables. Compatible with Heyco Double D holes. For a list of compatible cables refer to the datasheet.
Lock-it strain relief bushings that easily snap onto round cables and maintain a 90º angle without damaging the cable. Consult the datasheet's table for a list of compatible cable sizes.
Lock-it strain relief bushings that easily snap onto round cables and maintain a 90º angle without damaging the cable. Consult the datasheet's table for a list of compatible cable sizes.
Lock-it strain relief bushings that easily snap onto round cables and maintain a 90º angle without damaging the cable. Consult the datasheet's table for a list of compatible cable sizes.
Lock-it strain relief bushings for securing flat cables through Heyco Double D holes. Fit SPT-2 HPN cables measuring AWG 18/2 (2.9mm x 8mm), 18/3 (2.9mm x 8mm) or 16/3 (4.1mm x 7.6mm).
Lock-it strain relief bushings for securing flat cables through Heyco Double D holes. Fit SPT-2 HPN cables measuring AWG 18/2 (2.9mm x 8mm), 18/3 (2.9mm x 8mm) or 16/3 (4.1mm x 7.6mm).
Lock-it strain relief bushings easily fasten onto round cables. Compatible with Heyco Double D holes. For a list of compatible cables refer to the datasheet.
Right angled lock-it strain relief bushings easily snap onto flat cables and mount into Heyco Double D holes. Fit HPN cables measuring AWG 18/3 (3.8mm x 8.6mm) or 16/3 (4.1mm x 9.4mm). Also fit SPT-2 cables of AWG 18/3 (3.8mm x 10.2mm) or 16/3 (4.1mm x 10.4mm). SPT-3 cables measuring AWG 18/2 (4.8mm x 8.9mm), 18/3 (4.8mm x 9.9mm), 16/2 (5.1mm x 9.4mm), 16/3 (5.1mm 10.9mm) or 14/2 (6.1mm x 10.7mm).
White lock-it strain relief bushings easily fasten onto round cables. Compatible with Heyco Double D holes. For a list of compatible cables refer to the datasheet.
Pigtail bushings use a spring to prevent sharp bends in flat cables. Fits SPT-1 cables measuring AWG 18/3 (3mm x 7.6mm) or SPT-2 & HPN cables measuring AWG 18/2 (3.8mm x 7.1mm).
Strain relief bushings with a nylon spring to prevent sharp bends in round cables. Fit SV & SVT cables measuring AWG 18/2 (6.4mm), 18/3 (6.5mm). Also fit HPD cables measuring 18/2 (6.9mm) or 16/2 (7.4mm)
Pigtail bushings use a spring to prevent sharp bends in round cables. Fit SJT cables measuring AWG 18/4 (9.1mm) and SJT & SJTO cables of 14/3 (9.4mm) diameter. Also fit S & ST cables measuring 18/2 (9.9m), 18/3 (10.3mm), 16/2 (10.3mm) and 16/3 (10.9mm).
Strain relief bushings with a nylon spring to prevent sharp bends in round cables. Fit SV & SVT cables measuring AWG 18/2 (6.4mm), 18/3 (6.5mm). Also fit HPD cables measuring 18/2 (6.9mm) or 16/2 (7.4mm)
White strain relief bushings with a nylon spring to prevent sharp bends in round cables. Fit SV & SVT cables measuring AWG 18/2 (6.4mm), 18/3 (6.5mm). Also fit HPD cables measuring 18/2 (6.9mm) or 16/2 (7.4mm)
90º angle strain relief bushings for flat cables. Fit SPT-3, SRD & SRDT cablese measuring AWG 10/3 (8mm x 6.8mm). Fits 25.4mm holes with panels up to 3.2mm thick.
Strain relief bushings to reduce strain on flat cables. Fits SPT-1 cables measuring AWG 18/3 (3mm x 7.6mm). Also fits SPT-2 HPN cables measuring AWG 18/2 (3.8mm x 7.1mm) or 16/2 (4.1mm x 7.6mm)
Right angled strain relief bushings for flat cables. Fit SPT-2 cables measuring AWG 18/3 (3.8mm x 10.2mm) or 16/3 (4.1mm x 10.4mm). Also fit SPT-3 cables measuring AWG 18/2 (4.8mm x 8.9mm), 18/3 (4.8mm x 9.9mm), 16/2 (6.1mm x 9.4mm), 16/3 (5.1mm x 10.9mm).
Strain relief bushings to keep flat cables at a 90º angle. Fit SPT-3 cables measuring AWG 16/2 (5.1mm x 9.4mm), 14/3 (5.1mm x 10.9mm), 14/2 (6.1mm x 10.7mm) or 14/3 (6.1mm x 13mm).
Right-angled strain relief bushings to reduce strain on flat cables. Fits SPT-1 cables measuring AWG 18/3 (3mm x 7.6mm). Also fits SPT-2 HPN cables measuring AWG 18/2 (3.8mm x 7.1mm) or 16/2 (4.1mm x 7.6mm)
Right angled strain relief bushings for flat cables. Fit SPT-2 cables measuring AWG 18/3 (3.8mm x 10.2mm) or 16/3 (4.1mm x 10.4mm). Also fit SPT-3 cables measuring AWG 18/2 (4.8mm x 8.9mm), 18/3 (4.8mm x 9.9mm), 16/2 (6.1mm x 9.4mm), 16/3 (5.1mm x 10.9mm).
Right angled strain relief bushings for flat cables. Fit SPT-3 cables measuring AWG 14/2 (6.1mm x 10.7mm), 14/3 (6.1mm x 13mm), 12/3 (7.4mm x 13mm) or 12/3 (7.4mm x 16.5mm).
Strain relief bushings designed to keep flat cables at a 90º angle. Fit SPT-2 & HPN cables measuring AWG 18/3 (3.8mm x 10.2mm), SPT-3 & HPN cables measuring AWG 18/2 (4.8mm x 8.9mm), 16/2 (5.1mm x 9.4mm) or HPN cables measuring 16/3 (4.1mm x 9.4mm).
Bushings designed to relieve strain in round cables while maintaining a 90º angle. Fits SJ, SJO & SJT cables measuring AWG 18/2 (7.6mm), 16/2 (8.3mm) or 18/3 (8.4mm).