Heyco
Heyco Products Inc offers an extensive selection of strain relief bushings, insulating bushings, nylon hole plugs, liquid tight fittings, cable clips & clamps, IEC connectors, wire positioning & terminating products.
Arrow Clip Standard Natural
0317
EACH
22.9mm
1.7mm
9.5mm
8.1mm - 8.5mm
1.6mm - 8.6mm
Arrow clips easily secure panels into 8.1mm to 8.5mm holes. The nylon is soft enough to squeeze and remove the clip for reuse. Fit panels 1.6mm to 8.6mm thick.
Bumper Feet Snap-in Black
G3016
EACH
4.7mm
20.6mm
7.9mm
0.8mm - 1.6mm
4.7mm x 12.7m rubber bumper for use as mounting feet to prevent equipment sliding or moving. Snaps into 7.9mm holes with panels up to 1.6mm thick.
Bumper Feet Snap-in Black
G3017
EACH
6.3mm
20.6mm
7.9mm
0.8mm - 1.6mm
6.3mm x 12.7m rubber bumper for use as mounting feet to prevent equipment sliding or moving. Snaps into 7.9mm holes with panels up to 1.6mm thick.
Bumper Feet Snap-in Black
G3018
EACH
9.5mm
20.6mm
7.9mm
0.8mm - 1.6mm
9.5mm x 12.7m rubber bumper for use as mounting feet to prevent equipment sliding or moving. Snaps into 7.9mm holes with panels up to 1.6mm thick.
Bumper Feet With Drive Pin Black
2544
EACH
6mm
21mm
7.7mm
5mm - 8mm
Two piece 21mm bumper set with a slotted screw to fasten the bumper into 7.7mm holes. Suitable to use as feet. Fits panels up to 8mm thick.
Bumper Feet With Drive Pin Black
2547
EACH
12mm
20mm
8.1mm
0.5mm - 1.2mm
Reusable santoprene bumper for 8.1mm holes. To install, simply insert pin into the mounting hole, then press to secure. Fits panels up to 1.2mm thick.
Bumper Feet With Drive Pin Black
2545
EACH
10mm
20mm
7.8mm
0.8mm - 1.5mm
Reusable santoprene bumper for 7.8mm holes. To install, simply insert pin into the mounting hole, then press to secure. Fits panels up to 1.5mm thick.
Bumper Feet With Drive Pin Black
2551
EACH
18mm
20mm
8.1mm
0.5mm - 1.2mm
20mm santoprene bumpers with a drive pin to fit in 8.1mm holes. Fit panels up to 1.5mm thick.
Bumper Feet With Drive Pin Black
2543
EACH
5mm
25mm
7.6mm
0.8mm - 1.5mm
25mm santoprene bumpers with a drive pin to fit in 7.6mm holes. Fit panels up to 1.5mm thick.
Bumper Feet With Drive Pin Black
2549
EACH
15mm
20mm
8.1mm
0.8mm - 1.8mm
Reusable santoprene bumper for 8.1mm holes. To install, simply insert pin into the mounting hole, then press to secure. Fits panels up to 1.8mm thick.
