Products tagged with 'Screw Terminals'
Terminal Block Brown
9212
EACH
Terminal block with 12 poles. Rated for 450V 24A (IEC) or 300V 6A (American).
Screw Terminal Thru-Hole Mount
K8190
EACH
11.5mm
8.3mm
7.1mm
6-32
Snap-in horizontal screw terminals rated for 15 Amps. The screw is supplied unassembled.
Lug Connector Single Hole Offset
1851
EACH
35.1mm
9.7mm
19.1mm
Made from seamless, pure electrolytic copper. 100% conductivity for highest efficiency. Completely reusable. Requires no special installation tools. UL listed and CSA certified for use with copper conductors. Marked with catalog description and conductor range.
Screw Terminal Thru-Hole Mount
K8191
EACH
7.9mm
7.9mm
5.4mm
6-32
Snap-in vertical screw terminals rated for 15 Amps. The screw is supplied unassembled.
Terminal Block Screw Mount White
1828
EACH
117.5mm
21mm
18.8mm
12 pole terminal blocks that fasten to panels with M3 screws. Rated 300V 15A.
Screw Terminal Thru-Hole Mount
K7700
EACH
11.5mm
8.3mm
7.1mm
6-32
Snap-in horizontal screw terminals rated for 15 Amps. Screw is supplied installed and captivated.
Connector Low Profile Screw
K1201
EACH
8.4mm
1.57mm
9.5mm
6-32
Swage mounted terminals with a 6-32 threaded screw installed and captivated inside.
Terminal Block Screw to Screw Natural
9395
EACH
26.7mm
20mm
16.8mm
Raised base terminal blocks with 3 poles. Rated 450V 30A (AEC) or 300V 30A (American). Fits AWG 20-10 (4mm²) wires.
Screw Terminal Offset Leg
K1248
EACH
9.5mm
6-32
Swage mounted screw terminals rated at 15 Amps. The 6-32 screw is supplied installed and captivated.
Lug Connector Single Hole Offset
1850
EACH
25.4mm
7.9mm
17.5mm
Made from seamless, pure electrolytic copper. 100% conductivity for highest efficiency. Completely reusable. Requires no special installation tools. UL listed and CSA certified for use with copper conductors. Marked with catalog description and conductor range.
Recently viewed products
