Wire Clips & Clamps

Cable clamps that easily close or open for re-use. Attach to panels with a #10 screw. Hold cables up to 31.8mm diameter.

Cable clamps that easily close or open for re-use. Attach to panels with a #10 screw. Hold cables up to 30.1mm diameter.

Cable clamps that easily close or open for re-use. Attach to panels with a #10 screw. Hold cables up to 28.6mm diameter.

Cable clamps that easily close or open for re-use. Attach to panels with a #10 screw. Hold cables up to 34.9mm diameter.

Cable clamps that easily close or open for re-use. Attach to panels with a #10 screw. Hold cables up to 38.1mm diameter.

Cable strap to hold bundles of cables to a chassis. Locks into itself and is releasable for the addition or removal of wires. Holds cables and bundles up to 11.1mm in diameter.

Cable strap to hold bundles of cables to a chassis. Locks into itself and is releasable for the addition or removal of wires. Holds cables and bundles up to 6.35mm in diameter.

Cable strap to hold bundles of cables to a chassis. Locks into itself and is releasable for the addition or removal of wires. Holds cables and bundles up to 9.53mm in diameter.

Self adhesive cable clips for 28.5mm x 11.4mm flat ribbon cables.

Cable clamps capable of inserting or removing cables without further adjustment. Fits bundles up to 19.1mm.

Strain relief cable clamp reduces damage from pushing, pulling and twisting of cables. Easy attachment; simply snap around cable. Can be fastened with a 5mm screw or using the 3.4mm nub in a clear hole.

Cable clips with adhesive backing on both ends of the clip to securely hold 9.53mm diameter cables.

Cable clips with adhesive backing on both ends of the clip to securely hold 12.7mm diameter cables.

Cable clips with adhesive backing on both ends of the clip to securely hold 3.96mm diameter cables.

Cable clips with adhesive backing on both ends of the clip to securely hold 3.18mm diameter cables.

"U" shaped blind fasteners for installation of pipes or cables on a wall or ceiling.

Heavy duty cable clip to secure 4.37mm diameter cables.

Heavy duty cable clip to secure 2.92mm diameter cables.

Heavy duty cable clip to secure 5.95mm diameter cables.

Heavy duty cable clip to secure 7.54mm diameter cables.

Nail-in cable clips for a permanent fixture to secure flat 5.2mm diameter cables.

Nail-in cable clips for a permanent fixture to secure 6.6mm diameter cables.

Nail-in cable clips for a permanent fixture to secure 8.5mm diameter cables.

White nail-in cable clips for a permanent fixture to secure 8.5mm diameter cables.

Cable clips with a single adhesive backed point for easy installation. Fit 9.53mm diameter cables.

Cable clips with a single adhesive backed point for easy installation. Fit 6.35mm diameter cables.

Cable clips with a single adhesive backed point for easy installation. Fit 5.16mm diameter cables.

Cable clips with a single adhesive backed point for easy installation. Fit 3.18mm diameter cables.

Adhesive backed clips that use tension to hold wires and bundles 19.1mm in diameter.

Adhesive backed clips that use tension to hold wires and bundles 12.7mm in diameter.

Adhesive backed clips that use tension to hold wires and bundles 6.4mm in diameter.

Adhesive backed clips to hold 5.5mm x 6.1mm of wires and bundles.

Adhesive backed clips to hold 8.9mm x 9.1mm of wires and bundles.

Adhesive backed clips to hold 3.2mm x 6.4mm of wires and bundles.

Adhesive backed clips to hold 3.2mm x 6.4mm of wires and bundles.

Adhesive backed clips to hold 3.2mm x 12.7mm of wires and bundles. Can also be mounted with an imperial #8 screw.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Insert cables through the side. Fits cables and bundles up to 11.1mm x 18.3mm.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Insert cables through the side. Fits cables and bundles up to 11.1mm x 26.2mm.

Rectangular cable holders that uses a latch to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 3.2mm thick. Fits cables and bundles up to 11.1mm x 8.4mm.

Rectangular cable holders that uses a latch to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Fits cables and bundles up to 11.1mm x 3.6mm.

Rectangular cable holders that uses a latch to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Fits cables and bundles up to 11.1mm x 17.5mm.

Rectangular cable holders that uses a latch to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Fits cables and bundles up to 11.1mm x 8.4mm.

Rectangular cable holders that uses a latch to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Fits cables and bundles up to 11.1mm x 25.4mm.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Insert cables through the side. Fits cables and bundles up to 11.1mm x 19.1mm.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Insert cables through the side. Fits cables and bundles up to 11.1mm x 19.1mm.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Insert cables through the side. Fits cables and bundles up to 11.1mm x 26.9mm.

Rectangular cable holders that uses tension to secure cables and bundles. Features a rubber adhesive base. Fits cables and bundles up to 11.4mm x 4.7mm.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Fits cables and bundles up to 11.1mm x 18.8mm.

Rectangular cable holders that uses tension to secure cables and bundles. Features a rubber adhesive base. Fits cables and bundles up to 11.4mm x 19mm.

Rectangular cable holders that uses tension to secure cables and bundles. Mounts into 4.8mm PCB holes with panels up to 1.9mm thick. Fits cables and bundles up to 11.1mm x 4.8mm.