Keystone Electronics

Female threaded zinc-plated brass spacers with a Hexagonal shape to allow for easy grip when fastening.

Male/female threaded spacers with a hexagonal shape that allows for easy grip when fastening. Made with nylon 6/6.

Staking kits for single end terminals, eyelets or rivets. Kits Include: Anvil Holder, Swaging tools for .062" (1.57mm) to .125" (3.2mm) swage diameter, Anvils for .070" (1.78mm) to .152" (3.86mm) via Solder Turrets.

These kits provides all of the components needed to stake most terminals, standoffs, eyelets or rivets. These kits include: Anvil Holder, Swaging tools for .062" (1.57mm) to .180" (4.8mm) swage diameter, Swaging tool for .051" (1.30mm) to .098" (2.49mm) diameter double ended turret terminals, Anvils for swage standoffs / spacer, Anvils fro forked turret terminals and Spring loaded receding pins.

Anvils for fork type terminals. Accepts Diameter of 3/32" (2.38mm) to 5/32" (3.97mm) at one end and diameter of 3/16" (4.76mm) other end. .040" (1.02mm) slot one end and .060" (1.52mm) slot at other end.

Hold .250" (6.4mm) diameter anvils for use in drill or arbor press. For use in vices, Arbors, kickpresses, punch presses etc. Include a holder, 2 washers and wing nut plus instructions. May be used with receding pins & springs for eyelet assembly.

.069" (1.75mm) Diameter receding pins to be used with the following products: Anvil holder K1719, Anvil K1722 and Return spring K1321.

.045" (1.14mm) Diameter receding pins to be used with the following products: Anvil holder K1719, Anvil K1722 and Return spring K1321.

Staking tool for Single End terminals, Eyelets or Rivets. For Double End (Feed Thru) terminals. Fits .180" (4.57mm) through .190" (4.83mm) diameter shanks. Hole in Tool fits over pin head and securly stakes the rivet part of the terminals.

The top ends of swage staking tools for .062" (1.57mm) to 0.98" (2.49mm) diameter shanks. For Single End terminals, Eyelets or Rivets.