Keystone

Keystone Electronics Corp has battery holders, fuse clips & holders, micro pins & jacks, quick-fit terminals, plugs & jacks, screw terminals, LED spacers, instrument handles, plus much more.

View as Grid List
Display per page
Picture of Bushing Split Black

Bushing Split Black

K8492
EACH
10.3mm
16.3mm
14.3mm
9.9mm
Snap-in bushings with an opening in the side to easily insert cables or support diameters larger than the bushing's default.
to purchase this item
Picture of Bushing Split Black

Bushing Split Black

K8493
EACH
10.3mm
17.4mm
15.9mm
11.5mm
Snap-in bushings with an opening in the side to easily insert cables or support diameters larger than the bushing's default.
to purchase this item
Picture of Bushing Split Black

Bushing Split Black

K8491
EACH
10.3mm
14.3mm
12.7mm
7.9mm
Snap-in bushings with an opening in the side to easily insert cables or support diameters larger than the bushing's default.
to purchase this item
Picture of Captive Nut Blind

Captive Nut Blind

K4343
EACH
12.7mm
10.31mm
8-32
Unique reusable nylon fastener with a brass threaded nut. Installs with finger pressure for easy assembly. Screw may be removed or replaced. Eliminates need for insulating washers.
to purchase this item
Picture of Captive Nut Blind

Captive Nut Blind

K4341
EACH
7.92mm
6.35mm
4-40
Unique reusable nylon fastener with a brass threaded nut. Installs with finger pressure for easy assembly. Screw may be removed or replaced. Eliminates need for insulating washers.
to purchase this item
Picture of Captive Nut Blind

Captive Nut Blind

K4342
EACH
9.53mm
7.9mm
7.92mm
6-32
Unique reusable nylon fastener with a brass threaded nut. Installs with finger pressure for easy assembly. Screw may be removed or replaced. Eliminates need for insulating washers.
to purchase this item
Picture of Coaxial Connector "F" Female Connector

Coaxial Connector "F" Female Connector

K911
EACH
23.8mm
10.7mm
11.9mm
.375-32
Snap-fit mounting for positive retention during wave soldering. Supplied with washer and nut.
to purchase this item
Picture of Coin Cell Enclosure Contact Layout Low Profile Coin Cell Enclosure

Coin Cell Enclosure Contact Layout Low Profile Coin Cell Enclosure

K120TR
EACH
6mm
4mm
1.8mm
Surface mounted positive battery contacts with a low profile. For corresponding negative contacts refer to products K112 and K118. 5000 units are supplied on each tape & reel.
to purchase this item
Picture of Coin Cell Holder 1/3 N Black

Coin Cell Holder 1/3 N Black

K499
EACH
19.1mm
2.6mm
15.1mm
Thru-hole mounted holders for a single "1/3 N" battery..
to purchase this item
Picture of Coin Cell Holder 11.6mm

Coin Cell Holder 11.6mm

K2997
EACH
12.1mm
14.9mm
6mm
13.2mm
Thru-hole mounted holders for a single 11.6mm coin battery.
to purchase this item
Products
Filters Close
Clear All
Description Clear
  • Show More
Type Clear
Colour Clear
Material Clear
Length Clear
Width Clear
Height Clear
Diameter Clear
Mounting Hole Diameter Clear
Internal Hole Diameter Clear
Shaft Diameter Clear
Thickness Clear
Panel Thickness Clear
Profile Clear
Internal Dimensions Clear
Thread Length Clear
Thread Pitch Clear
Spacing Clear
PCB Thickness Clear
PCB Hole Diameter Clear
Chassis Thickness Clear
Chassis Hole Diameter Clear
Screw Size Clear
Number of Poles Clear
Voltage Rating Clear
Current Rating Clear
Insulation Type Clear
Tab Size Clear
Cable Size mm Clear
Cable Size AWG Clear
Cable Size Minimum Clear
Cable Size Maximum Clear
Gender Clear
Mounting Type Clear
Battery Type Clear
IP Rating Clear
Minimum Temperature Clear
Maximum Temperature Clear
Flammability Rating Clear
Certifications Clear
Other information Clear