Search

AUSTRALASIA’S LEADING SUPPLIER OF CABLE & WIRING ACCESSORIES, NYLON FASTENERS & ELECTRONIC HARDWARE

+61 8 8268 2733   [email protected]

Home Page
Products
    Menu Close

    Keystone Electronics

    Keystone Electronics Corp has battery holders, fuse clips & holders, micro pins & jacks, quick-fit terminals, plugs & jacks, screw terminals, LED spacers, instrument handles, plus much more.

    View as Grid List
    Display per page

    Keypad Dome Maxi, Four Legs

    K5173TR
    EACH
    0.65mm
    12.2mm
    Keypad domes with four legs. Current Rating: .005 to 100 mAMP DC. Trip Force: 7.8 oz. (220g). Voltage Rating: .1 to 100 VD. 4000 pieces on tape and reel.
    to purchase this item

    Keypad Dome Maxi, Four Legs

    K5176TR
    EACH
    0.8mm
    12.2mm
    Keypad domes with four legs. Current Rating: .005 to 100 mAMP DC. Trip Force: 7.8 oz. (220g). Voltage Rating: .1 to 100 VD. 4000 pieces on tape and reel.
    to purchase this item

    Keypad Dome Spacer Adhesive

    K5200
    EACH
    970mm
    610mm
    Spacers for keypad domes with an adhesive back.
    to purchase this item

    Knob Single Bar Grey

    K8572
    EACH
    13.97mm
    16.51mm
    14.99mm
    6.43mm
    Instrumentation knobs marked for precise adjustments.
    to purchase this item

    Knob Single Bar Red

    K8571
    EACH
    13.97mm
    16.51mm
    14.99mm
    6.43mm
    Instrumentation knobs marked for precise adjustments.
    to purchase this item

    Knob Single Bar Yellow

    K8570
    EACH
    13.97mm
    16.51mm
    14.99mm
    6.43mm
    Instrumentation knobs marked for precise adjustments.
    to purchase this item

    Knob Standard Black

    K8517
    EACH
    16mm
    19.05mm
    14.99mm
    3.17mm x 12.7mm Shaft Hole
    6-32
    Instrumentation knobs marked for precise adjustments.
    to purchase this item

    LED Holder Snap-In Black

    K8309
    EACH
    4.8mm
    0.76mm
    5.9mm
    4.3mm
    Designed for use with T-1 & T -1 3/4 LED’s in .060" (1.52mm) - .070" (1.78mm) thick panels.
    to purchase this item

    LED Holder Snap-In Black

    K8310
    EACH
    6.9mm
    0.76mm
    8mm
    6.4mm
    Designed for use with T-1 & T -1 3/4 LED’s in .060" (1.52mm) - .070" (1.78mm) thick panels.
    to purchase this item

    LED Lens Cap Round Clear

    K8659
    EACH
    1.52mm
    4.9mm
    4.3mm
    1.57mm - 3.18mm
    Round lens caps designed for use with T-1 LEDs.
    to purchase this item
    Filters Close
    • Show More